April 2010
Project Showcase - WannaGetWired Rewires Older Building In Ontario
Author: Frank Faggiani, WannaGetWired
We asked some of the Dealer / Integrators in our company directory to send us examples of projects they have completed so we could share them. If you have one you'd like to submit please email news@hometoys.com and we'll send you a template to use so we can publish it here.
Company Name: WannaGetWired
Contact: Frank Faggiani
Phone Number: 416 456 2369
Email address: wannagetwired@rogers.com
Website address: www.wannagetwired.ca
Project budget: open
List of Products used: Cat5e, wiremold, B&T surface mount jacks, Hammond Enclosed Rack
Unusual situations or problems that you came across: Older bldg. that had an addition put on without a cable or wire corridor to traverse the two.
Customer was moving into a new office location but the building although renovated was approximately 100 years old. Customer wanted to use existing stations 'as is' but after a couple of tests we found defects. The quote was ball park as the amount of time to create a corridor to bring new wires from the server location to the other side of the bldg had a degree of difficulty. Also the location for the server was an existing closet which required air conditioning. The existing wiring was nothing short of a 'birds nest' located in a furnace room.
|
The Birds Nest |
The Birds Nest |
Server Room |
Server Room |
Back Office |
Century old elevator shaft |
Contact:
Frank Faggiani, (416) 456-2369, wannagetwired@rogers.com
Comments (0)
This article does not have any comments. Be the first to leave a comment below.
